Q32系列的輪胎式拋丸清潔機

◆物料特征 Product features

本固定式、履帶式通過式拋丸機適多木種，大中批量化生育軸類零件的的界面防銹或拋丸進行強化，除去軸類零件的須得不是怕摩擦的單重在150kg以下的的鑄件及熱加工件，該機型既可單機聯機選擇，又可配線選擇. 專屬于煅造機戒范圍之內。

系統自功：將產品置入橡膠制品履帶滾筒設備中，運營專業人員輕按“運轉”旋鈕，拋丸室門自功關掉，拋丸消除開始，履帶前進運轉，產品一直地做翻滾，強勢拋丸器將拋丸高速收費站拋射入未能翻滾的產品面上，產品可壓根飽滿地能夠消除。鋼丸按照履加上的溜孔進入到雷韻運送帶機，再將鋼丸運送帶到斗式提高自己機，經斗式提高自己機提高自己到分割器，被分割后貯存待會兒用。拋丸尾聲后，拋丸室門系統自功進入，履帶改變方向，將產品卸出。

半自動：裝置是合理利用極速轉回的水泵葉輪將彈丸拋向履帶內不間斷360度旋轉的鏜孔上，若想起到清洗鏜孔的意圖。它符合于各家業中的中大型鑄件、鍛件、沖壓加工件、傘齒、彈黃等件的清砂、除銹裝置、去硫化皮和接觸面突破。該裝置是宗合境里外技術，定制發掘的新車輛，是一種種清洗速度好、結構類型緊身、環境噪聲小、成套裝置性好的清洗裝置。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆企業產品優缺點 Product features

1.機器主要采用了懸臂軸流式式拋丸器，有食用使用時間長和結構的容易等優點。

2.分為BE型提取器，享有健康的提取成效和生產的率，對提生葉輪有更好地的用途。

3.所采用袋式排塵器，焊接煙塵擺放溶度達不到我國規范規定的規范，大天地有效改善了操控者的勞作條件。

4.主要采用耐腐蝕膠履帶，減少了對鏜孔的撞擊及傷到前提，大大減少了廣州POS機的燥音。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆適用人群超范圍 Applicable scope

      壓鑄件、緊密鑄件、緊密鍛件等的清理工作、光飾。的還原熱清理件、鑄件、鍛件的表層脫色皮。氣彈簧的強化裝備。鎖緊件防銹和前清理。

1、按照法國八十五年末的拋丸機廠家使用國產圖片化生產。

2、選擇直聯強效拋丸器，傳播成功率好，拋丸量大。

3、風選分割器、丸砂分割率大于等于99%。

4、彈丸所覆蓋平均，無拋丸任何死角。

5、抗刮件選用保修期長，改換在短時間。

6、設配低躁音作業。

7、電氣開關應用繼電氣產品（或PLC）管理，管理柜、聲光報警聲音器報警聲音裝備，PC應用三菱數控系統名牌，主要是原電子元件應用simens全資名牌的操作簡易、信得過。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆最主要的技術設備因素 Main technical parameters