靜電噴涂系統類型

STR-NKP-1型熱力管道罐壁噴涂工藝器  Spraying machine for piping inner wall

◆實用區域 Applicable scope

實用作圓洞及中型機管網的內腔噴水性水性涂料，它是再生利用無氣噴水性水性涂料機輸送機來的油田水性水性涂料，根據專用的霧炮，使水性水性涂料吸霧后立即達成揚聲器形（園圓錐形、漏空），粗糙地噴在管網內外表，以此進行管網的噴水性水性涂料。 NKP-1型大部分選用到Ф50-Ф300mm的通風管道，水性金屬漆效果不能不低于80秒（4號福特杯）。要是工業漆黏度不低于80秒，用加有機溶劑就稀釋。NKP-1型常見上免受熱力管道大小受限制，但比較好不生長于15米。

Apply YuXiaoKong and medium pipe wall coating, it is to use it without gas transmission to high voltage coating, through the special nozzle, to make the paint spray directly formed after flared (garden tapered, hollow), evenly spray in the pipe inner surface, so as to realize the pipe coating. NKP-type 1 is mainly used in Ф 50-Ф 300 mm pipe, coating viscosity shall not be higher than the 80 seconds (4 ford cup). If the paint is higher than 80 seconds, viscosity should be diluted solvent. NKP-type 1 basically from piping length restrictions, but had better not longer than 15 meters.

使用方框圖 Installation to which