吸收式晾干機

◆好產品性能 Product features

※有著穩定性高不同的吸氣的壓力和露點

1.吸出塔之特別與直勁經檢測導致五金機械核算，塔床摩擦阻力小，擔保了壓縮成氣休干澀劑5秒的碰到時間段，需要滿足半成品氣的露點標準要求。

2.30％的干澡劑總流量，于賠償費干澡劑的大自然衰老，確保安全生產干澡。

3.新型擴散作用器，抓實環流均衡確認干躁劑層，去除溝流毛細現象。

※機體再生氣量損失值為14％

1.優秀的機筒設計的概念，保存圖片100％的離心分離熱能量，保管的熱能量用作加劇可可機體再生的時候的可可機體再生氣水溫，提高自己裝置的解吸實力，可使得可可機體再生更根除。

2.干澡和粉碎適用單向煙囪效應方案設計，濕冷空氣穿過干的溶解劑法定期限果最佳。粉碎氣出口到含濕量把控在亞趨于穩定環境，使泄壓閥消音器器及泄壓閥緩沖區無起霜之慮。

3.可只能根據干燥的機的操作阻抗實際需求調整恢復氣水量，提高認識恢復空氣連續不斷安全，恢復心理壓力低至臨界值。

※干澡劑操作人類期限長

1.比較適合的機筒寬度，使氣體在粗糙劑層的氣速和時間間隔增加好的程序，積極更好地發揮粗糙劑的性。

2.適度的體統配資，在氣旋進行機筒前，經除油正確處理快速移除氣旋中內油份物與重環境揮發性有機物，盡量不要干劑層受環境環境破壞。

※主設備分為了新鮮高低品質電動伸縮及氣動式閥和穩定可靠的全網上可程序編程序調控器，電腦程序界面信賴，自主不間斷凸顯雙塔工作，循環法周期怎么算工地可編，出廠之更改10min。銅閥生命短短50萬次行動。

※鍋筒內部作冷電鍍鋅防銹凈化處理凈化處理，10年不氧化。

※工作明確、性能參數穩定性、進行簡變，安裝就不需要基本知識。

※Bend it out on the same has the stable pressure and dew point

1. The height and diameter adsorption tower by the experimental results calculated precisely, tower, ensure the small resistance bed compressed gas desiccant 5 seconds contact time, meet the requirements of the finished product angry dew point.

2.30% of the surplus, desiccant used to compensate for the natural aging, ensure desiccant dry.

3. Large diffuser, ensure uniform through the desiccant air layer, eliminate channel flow phenomenon.

※Bend the gas loss less than 14% renewable

1. Excellent barrel design, save 100% of the adsorption quantity of heat, storage quantity of heat is used to increase the regeneration stage again angry temperature, improve equipment desorption ability, make renewable more thoroughly.

2. Dry and regeneration of the reverse convection scheme, wet air through the dry when the adsorbent best effect. Getting angry export moisture content control in the saturated state, the muffler and exhaust passage without concentrations of condensation.

3. According to the operation of the dryer load demand adjust dosage, ensure again angry for stability, regeneration renewable air pressure low to critical.

※Bend desiccant long service life

1. The right of barrel size, make the gas through the desiccant flow velocity and time of layer be the best, give full play to the desiccant performance.

2. The reasonable system configuration, in the air into the barrel, except by the efficient before oil processing timely removal in the air in content and heavy oil pollutant, avoid desiccant layer contamination.

※The equipment adopts bend novel high quality and pneumatic valve electric and advanced and reliable full electronic programmable controller, friendly interface, automatic continuous display of the twin towers, working cycle, the programmable factory set 10 min. The valve life for 500000 times action.

※Bend the cylinder body wall be cold galvanizing antirust processing, 10 years don't rust.

※Bend action, stable performance, accurate, easy operation and installation with no need of foundation.

◆其主要水平參數值 Main technical parameters